It is no exaggeration to say that we have become entirely dependent on
our smartphones. We take them wherever we go, and the momentary wave of panic
to potentially leave you somewhere or lose you is universal. Cell phones are
our best technology, but that friendship is as strong as our Wireless Site Survey network. The
quality of the cellular network depends entirely on where you are at all times.
The signal strength is so geographically varied that the service may differ
from one room to another in the same building.
As an installer, a survey on the website is an essential tool to help
you and your customers save time and resources. In addition to providing clear
site design, a Site Survey can
identify areas where the signal is weak. This will allow you to inform your
customers where and why your service is absent and provide additional
information that will support your plans to solve these problems by
implementing the cellular signal reminder solution.
Let's take a look at site surveys,
why they are essential, and how to be successful.
What is a site survey?
Field research is the assessment
that must be made before installing a cellular signal booster. During the
investigation, the evaluators identify the most reliable mobile signal, which
allows suppliers to determine where to install the amplifier. During the
research, you can measure the amount of cable you will need and the dividers,
filters or other accessories you will need.
A site survey can demonstrate
existing signal coverage to your customers and draw attention to problem areas.
This can help stimulate conversation about product options and installation
solutions, as well as provide sales conversion opportunities.
Meters And Signal Strength
Some may argue that a site search
is not necessary, given the ability to use the phone in test mode to check the
cellular signal strength. However, this testing method is much less than a site
search, as the results will not be as accurate for a more significant site as
they would be with a search.
To get the most accurate reading
possible, do your research on the site using a signal counter, which detects
and displays frequency, bandwidth, and signal strength, updating in real-time
to avoid inaccuracies. The signal counters are independent of the operator and
can, therefore, detect the frequency and compatibility of the signal with any
operator. This is particularly important in a commercial environment, where
users subscribe to a variety of networks.
Conduct An
On-Site Study: Top View
Blueprints of the floor. Before arriving at the site, take some time to
review the plan. This will allow you to map the signal when you are there. Pay
attention to the size of the space: the size will determine which antennas to
use and where to place them during installation.
The floor plan can help you decide which amplifiers are necessary,
confirm the length of the cable and the number of appropriate dividers, and
determine any other possible need for accessories you may find. If access to
the building floor plan is not possible, this can help you outline a rough
description of the space digitally or on paper for your reference.
External signal evaluation. The investigation begins on the roof of the
structure. Using your multimeter, trace the perimeter of the building and
record the signal reading on each side. Be sure to record readings of all
channels and frequencies at once. Being consistent will help you avoid
complications later.
Signal Identification After comparing the readings from all sides,
identify the hyper location of the best signal. Slowly rotate 360 degrees in
place, using the light meter to find the signal source. Once this is
identified, record the direction from which the signal comes. This information
will help you locate the nearest cell tower and determine how the auxiliary antenna
should look.
Cable access During the investigation, it is essential to take into
account any ventilation or nearby duct that can be used as an entry point for
the internal cable. If there is no natural entry point, you must create an
artificial opening for cable access.
Assembly Ideally, you can mount the donor antenna on an existing vent
tube or post. Otherwise, you must create a mounting point with a mounting kit.
Depending on the design of the ceiling and the direction of the signal, you may
have to be creative and install your antenna support.
