How To Install a Wireless Network (WiFi) Connection

HowTo Install Wifi -

Installing a router is the first step to building a reliable home network, but how do you choose the right one? And after buying your router, how do you configure it? Follow this guide to set the appropriate router for a secure wireless (Wi-Fi) network.

Installing the Router –

Acquire A Wireless Router; there are a variety of factors that will determine which router is best for you. This includes distance, interference, transfer speed, and security Wifi Installed.

Which Wifi Router Is Best For Me One of the most important factors to consider when buying a router is the distance between the router and the devices to which it connects wirelessly. More expensive routers usually have more antennas, which can lead to a more stable connection to other distances.

Another factor to consider is the amount of signal interference. If you have multiple devices operating in the 2.4 GHz band, such as microwaves and cordless phones, they may interfere with the Wi-Fi signal. Newer routers can work in the much less crowded 5 GHz band and, therefore, less prone to interference. The disadvantage is that the 5 GHz signals do not go as far as the 2.4 GHz signals.

Transfer speed is a feature to consider. Newer routers claim to be able to transfer data of up to 450 Mbps. While this may be useful when moving data between two computers on a network, it will not increase the overall Internet speed as defined by your ISP. There are three main router speeds available: 802.11g (54 Mbps) 802.11n (300 Mbps) and 802.11ac (450 Mbps). It is essential to keep in mind that these speeds are practically impossible to achieve in an environment other than a clean room without signal interference. 

Finally, make sure that the router you buy has the latest form of wireless encryption, WPA2. It is quite standard on all new routers, but it is something to keep in mind if you are buying an old and used router. Older encryption algorithms are much less secure; A WEP key can be hacked in minutes.

Connect The Router To Your Modem  After purchasing your router, you need to connect it to your modem. The router will have a port on the back labeled WAN / WLAN / Internet. Connect this port to the modem with a standard Ethernet cable.

Make sure the router is powered on and powered on properly.

Connect To Computer Via Ethernet Cable This step is not always necessary, but it can be beneficial if you want to configure your wireless router before connecting wireless devices. Connecting a computer through a physical cable will allow you to change the wireless settings without losing the connection to the router.

For optimal efficiency, when configuring the router, connect it to the side of the computer while adjusting the settings. Once you have completed the router configuration, you can move it to where it usually is.